Boat Upholstery


Those speciality items that are needed for marine upholstery.

We have a few Stainless Steel Fastners listed on this page. For more Stainless Steel Fastners, go to Stainless Steel Fastners . For foam, go to Upholstery Foam Sheets .
Also see Snap Caps .
To find everything you could possibly need for Boat Upholstery, go to Outdoor Upholstery
For Upholstery Fabrics see:

Stainless Steel Staples, 1/4 '' Stainless Steel Staples, 1/4 "
 box of 1000 
Stainless Steel Staples. Used to staple fabric or vinyl onto plywood or plastic board. Will not rust around Salt Water. Less problems than Monel staples. Used in an Arrow T-50 Staple Gun, which is the most common stapler for home use.

Price:   $12.99    
Stainless Steel Staples, 5/16"
 box of 1000 
As above 5/16" long

Price:   $13.99    
Stainless Steel Staples, 3/8"  
 box of 1000 
As above, 3/8 inch long. Our best seller.

Price:   $14.99    
Stainless Steel Staples, 1/2"
 box of 1000 
As above 1/2 inch long.

Price:   $15.99    
Hydem Vinyl Strip, White Hydem Vinyl Strip, White
 yard 
Folded vinyl fabric that allows you to staple in the center and then folds over itself to hide your staple. Used around edges of vinyl seats that are attached to a board or along head liner in boats and RV's to finish off the edges. Use with our stainless steel staples. Also Available in Black and Navy

Price:   $1.99    
Hydem Vinyl Strip, Black
 yard 


Price:   $1.99    
Hydem Vinyl Strip, Navy
 yard 


Price:   $1.99    
Hydem Vinyl Strip, Tan
 yard 


Price:   $1.99    
Hydem Vinyl Strip, Off White
 yard 


Price:   $1.99    
Hydem Vinyl Strip, Grey
 yard 


Price:   $1.99    
Hydem Vinyl Strip, Maroon
 yard 


Price:   $1.99    
Stainless Steel ''T'' Nuts, 1/4'' Stainless Steel "T" Nuts, 1/4"
 each 
Used to attach panels in Boats. Drill a 5/16 inch hole in the wood or plastic board and hammer in. Takes a 1/4-20 Machine Screw, see below. Very useful for upholstery and will not rust.

Price:   $1.29    
Drill Bit, 5/16'' Drill Bit, 5/16"
 each 
Cobalt Jobbers Length Drill Bit, National Aerospace Standard 907, Cobalt, HSS Gold Finish, 135 degree Split Point. The best drill bit available. Can be used to drill Stainless Steel many many times.Used by our affiliated company, Marine Sewing. Use 5/16" size for "T" Nuts.

Price:   $13.59    
Drill Bit 1/8"
 each 
The same quality drill bit as the 5/16" that appears above. 1/8" is used for pilot holes for Canvas Fastners.

Price:   $3.36    
Machine Screw, 1/4-20x1 1/2'' Machine Screw, 1/4-20x1 1/2"
 each 
Stainless Steel 1/4-20 Machine Screw 1 1/2 inches long. Use with T Nuts, listed above. Many other sizes of machine screws and self tapping screws are available, Contact Customer Service.

Price for each
1 - 99 100+
$0.36 $0.22
   
Machine Screw, 1/4-20x2"
 each 


Price for each
1 - 99 100+
$0.43 $0.26
   
Machine Screw 1/4-20x2 1/2"
 each 


Price for each
1 - 99 100+
$0.49 $0.29
   
HackSaw Blade HackSaw Blade
 each 
Industrial Quality Bi Metal Hacksaw Blade. Cuts Stainless Steel very well. Much superior to consumer grade hacksaw blades

Price:   $3.89    
Stainless Steel Lock Washer, 1/4'' Stainless Steel Lock Washer, 1/4"
 each 
Lock Washer, use with T Nuts and Machine Screws

Price for each
1 - 99 100+
$0.07 $0.05
   
Stainless Steel Fender Washer Stainless Steel Fender Washer
 each 
An oversized 1/4" Washer, 1 1/2" in diameter, for use with Machine Screws and T Nuts. Used frequently in Marine Upholstery.

Price for each
1 - 99 100+
$0.39 $0.23
   
Panel Clips Panel Clips
 each 
Also known as Christmas Tree Clips, 1/2" diameter X 7/8" long, Double Head, Size 7. The most common size for Automotive and Marine Upholstery.

Price for each
1 - 99 100+
$0.50 $0.24
   
Poly Welt, 5/32" by the yard
 yard 
Cover this welt cord with the fabric of your choice.Non absorbing so will stand up in the outdoor environment.

Price:   $0.30    
Poly Welt, 5/32", Spool
Cover this welt cord with the fabric of your choice.Non absorbing so will stand up in the outdoor environment. 500 yard spool.

Price:   $48.95