Easy to use

Professional quality Fabric Grommet Tool

Installs Plain Grommets

These tools make installing a large number of grommets, much easier, as compared to the "Handi Grommet Kits".
To install a few grommets, our Handi Grommet kits are a good solution - see the link below. To install very large grommets or very large numbers of Grommets, use a bench mounted press. Grommet Setting presses are able set almost all sizes of grommets from 00 to the largest. Simply install a different set of grommet setting dies to set different size grommets. Grommet setting presses, are intended to be bolted down to a heavy work bench or floor standing, weighted steel frame. The lever action of the grommet setting press gives even the smallest person enough of force to set the largest grommets. contact Customer Service for more information on a press. For lesser requirements, a less expensive solution are the tools, below.

Rawhide Mallet Rawhide Mallet
 each 
Used by professionals to pound grommets. Helps prevent scarring of grommet setting tool, when installing large numbers of grommets. Size 3, handle length, 10", mallet diameter 1 3/4". Use with the cutting pad, shown below.

Price:   $39.99    

Weighted Rawhide Mallet Weighted Rawhide Mallet
 each 
This weighted professional grade mallet gives you extra leverage to make pounding grommets easier. Weighs two pounds.

Price:   $86.95    

Cutting Pad Cutting Pad
 each 
Resilient vinyl plastic. Used when cutting the hole for grommets. Decreases arm fatigue. 10" X 10" X 1/2" thick

Price:   $40.99    

Size 00 Grommet Inserting Die Size 00 Grommet Inserting Die
 each 
Professional grade two part die used to install Size 00 (3/16" I.D.) Plain Grommets into fabric.

Price:   $51.95    

Size 00 Grommet Hole Cutter
 each 
Professional grade Cutting Tool, used to punch hole in fabric (or other material) for a size 00 (3/16" I.D.) Plain Grommet.

Price:   $23.95    

Size 0 Grommet Hole Cutter
 each 
Professional grade tool, used to punch hole in fabric (or other material) for a size 0 (1/4" Inside Diameter) Spur or Plain Grommet.

Price:   $24.99    

Size 0 Grommet Inserting Die
 each 
Professional grade two part die used to install Size 0 (1/4" I.D.) Plain Grommets into fabric.

Price:   $51.95    

Size 1 Grommet Hole Cutter
 each 
Professional grade tool, used to punch hole in fabric (or other material) for a Size 1 (5/16" I.D.) Spur or Plain Grommet.

Price:   $25.99    

Size 1 Grommet Inserting Die
 each 
Professional grade two part die used to install Size 0 (5/16" I.D.) Plain Grommets into fabric.

Price:   $54.95    

Size 2 Grommet Hole Cutter
 each 
Professional grade tool, used to punch hole in fabric (or other material) for a Size 2 (3/8" I.D.) Spur or Plain Grommet.

Price:   $29.99    

Size 2 Grommet Inserting Die
 each 


Price:   $56.95    

Size 3 Grommet Hole Cutter
 each 
Professional grade tool, used to punch hole in fabric (or other material) for a size 3 (7/16" Inside Diameter) Spur or Plain Grommet.

Price:   $36.95    

Size 3 Grommet Inserting Die
 each 


Price:   $59.95    

Size 4 Grommet Hole Cutter
 each 
Professional grade tool, used to punch hole in fabric (or other material) for a size 4 (1/2" Inside Diameter) Spur or Plain Grommet.

Price:   $42.95    

Size 4 Grommet Inserting Die
 each 


Price:   $68.95