 |
Lock Nut, 8-32 |
Stainless Steel Locking Nut, fits Lift the Dot® Machine Screw stud and the Durable® Machine Screw stud. Use with #8 Washer
Price for each
|
|
|
| Lock Nut, 1/4"-20 | |
1/4"-20 Locknut (Nylock). Use with any of our 1/4"-20 Machine Screws (bolts). Identical, in apparence to the 8-32 that appears above, except that it fits a 1/4"-20 Machine Screw.
Price: $0.32 |
|
|
 |
Hex Nut, 8-32 |
Stainless Steel 8-32 Hex nut. Fits on Lift the Dot® Machine Screw stud and the Durable® Machine Screw stud. Use with #8 Flatwasher and #8 Lockwasher.
Price for each
|
|
|
 |
Flat Washer, #8 |
Stainless Steel Flat Washer used on Lift the Dot® Machine Screw Stud stud and the Durable® Machine Screw stud. Use with Hex Nut or Lock Nut
Price for each
|
|
|
 |
Lock Washer, #8 |
Stainless Steel Locking Washer for use with Lift the Dot® Machine Screw stud and the Durable® Machine Screw stud. Use with Hex Nut and Flat Washer
Price for each
|
|
|
|
|
Flat Washer, #10 |
Stainless Steel Flat Washer. Use with #10 Lock Nut or Hex Nut.
Price for each
|
|
|
|
|
Lock Washer, #10 |
Stainless Steel Locking Washer . Use with #10 Hex Nut or Cap Nut and Flat Washer.
Price for each
|
|
|
|
|
Hex Nut, 10-32 |
Stainless Steel Hex Nut . Use with #10 Flat Washer and #10 Lockwasher.
Price for each
|
|
|
 |
Cap Nut, 10-32 |
Stainless Steel Cap Nut. Applicable when a bolt protruding is unacceptable. Use with #10 Flat Washer and #10 Lock Washer.
Price for each
|
|
|
|
|
Cap Nut, 8-32 |
Stainless Steel Cap Nut for use with the Lift the Dot® Machine Screw stud and the Durable® Machine Screw stud. Applicable where a bolt end protruding is unacceptable. Use with #8 Lock Washer and #8 Flat Washer.
Price for each
|
|
|
|
|
Lock Nut, 10-32 |
Stainless Steel Locking nut (Nylock). Use with #10 Flat Washer.
Price for each
|
|
|
 |
#4 X 3/4" Oval Head Self Taping Screw |
Stainless Steel #4 by 3/4 inch long, Oval head Self Taping Screw. Used with the Common Sense® two screw base studs and to install curtain track. Use to mount the eyelet of the Durable Snap, stud and eyelet, into wood or fiberglass.
Price: $0.11 |
|
|
 |
#4 by 3/4 inch Flat head Self Taping Screw |
Stainless Steel #4 by 3/4 inch long, Flat head Self Taping Screw. Used with the Common Sense® two screw base studs and to install curtain track. Use to mount the eyelet of the Durable Snap, stud and eyelet, into wood or fiberglass.
Price: $0.12 |
|
|
 |
Stainless Steel Pop Rivet |
1/8" diameter, 1/8" grip button head stainless steel pop rivet, SSB44S. Use to mount the stud of the Durable Snap, stud and eyelet, into metal. Many other uses around a boat.
Price: $0.25 |
|
|
 |
Machine Screw, 1/4-20x1 1/2" |
Stainless Steel 1/4-20 Machine Screw 1 1/2 inches long. Use with T Nuts, listed above. Many other sizes of machine screws and self tapping screws are available, @@Contact@@ Customer Service.
Price for each
|
|
|
| Machine Screw 1/4-20x2 1/2" | |
Price for each
|
|
|
| Machine Screw, 1/4-20x2" | |
Price for each
|
|
|
 |
Stainless Steel "T" Nuts, 1/4" |
Used to attach panels in Boats. Drill a 5/16 inch hole in the wood or plastic board and hammer in. Takes a 1/4-20 Machine Screw, see below. Very useful for upholstery and will not rust.
Price: $1.29 |
|
|
 |
Stainless Steel Fender Washer |
An oversized 1/4" Washer, 1 1/2" in diameter, for use with Machine Screws and T Nuts. Used frequently in Marine Upholstery.
Price for each
|
|
|
|
|
Stainless Steel Lock Washer, 1/4" |
Lock Washer, use with T Nuts and Machine Screws
Price for each
|
|
|